Monster Cable HTS3000 Owner's Manual download pdf (Page 29)

Troubleshooting

PROBLEM–The PowerCenter is not receiving power.

Possible Cause #1

The PowerCenter is not turned On.

Possible Solutions

• Turn the PowerCenter Switch On.

• Make sure the PowerCenter’s AC power plug is plugged into a 120V wall outlet

that is properly grounded.

• In some households, a wall switch may need to be thrown to make the wall plug come alive.

Try turning on the light switches located near the wall unit powering the PowerCenter.

• If the PowerCenter Normal/Remote selector switch is switched to Remote, switch it to Normal.

Possible Cause #2

The PowerCenter Slow Blow 5A digital filter fuse is blown.

Possible Solutions

• Remove the 5A fuseholder on the back of the PowerCenter using a flat head screwdriver.

Examine the fuse to see if the filament (looks like squiggly line in the middle of the fuse)

is broken. If it is, the fuse is blown and needs to be replaced. If you have lost or run out

of the replacement fuses provided with the PowerCenter, simply go to your local electronics

store and buy a Slow Blow 5A 5X20mm fuse.

• To install a fuse, secure it in the fuseholder cap and push the fuse and cap

into the receptacle. Turn the fuseholder clockwise until tight.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

No comments

Monster Cable HTS3000 Owner's Manual Page 29