Monster Cable PERFECTVIEW 450L User Manual download pdf (Page 18)

Installing the PowerMount Mounting System

Remove all pieces of the PowerMount system to ensure

you have all the necessary parts.

Be sure to choose a mounting location with convenient

access to an AC power outlet.

Wood Stud Mounting:

Using an electronic stud sensor, locate two wall studs

up to 15” apart, at your desired mounting location.





With the help of a friend, position the

mounting system’s two horizontal wall plate arms over

the two wall studs. Using the provided level, conﬁ rm

that the mounting system is level.

Mark the stud centers in two slots in the top and

bottom wall plate arms with a pencil.

With your electrical drill and 3/16” (5 mm) bit,

pre-drill a 3” (76.2 mm) deep hole at each mark.

Attach the top wall plate arm to the wall using one

of the supplied lag bolts and washers, as shown

to the right.

Next, place the power unit mounting plate over

the mounting holes on the bottom wall plate arm.

Secure it with the other supplied lag bolt and washer.

Tighten each bolt with your electric drill or socket wrench.

DO NOT over tighten bolts. This can damage

the wall plate or your wall surface.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 112 113

No comments

Monster Cable PERFECTVIEW 450L User Manual Page 18